The function of the JBA active load cell junction box is to enable easy adjustment of load cell (output) manufacturing tolerances without any channel interaction, to give a summated output.
The JBA Junction Box is used to sum the outputs from up to four load cells to allow them to be connected to the LCA15/ADW15 Strain Gauge Indicator/Controller.
The individual channel gains can be set up via DIL switches and preset potentiometers to allow for 2, 3, or 4 load cells.
Gain is not interactive and offset is preset, to speed up matching of the load cell gain.
|Powering||10vdc nominal, from connected instrumentation|
|Connection||6 wire from instrument to JBA. 4 wire from JBA to each load cell|
|Gain setting per channel||Variable from 0.2 to 1.0 by use of switch and potentiometer (see table in Setup Instructions)|
|Maximum input voltage||20mV/V (200mV)|
|90 day accuracy stability||±0.06%gain|
|Effect of temperature||±0.02% per degree C typical at 2.5mV/V|
|Field terminals||35 degree screw operated cage clamp type|
|Maximum cable||size 2.5mm square|
|Dimensions||200 x 120 x 75mm|
|Environmental||Sealed to IP65 with cable entries via 5 x IP67 glands supplied fitted|
|Enclosure||ABS (120 x 200 x 75mm)|
|Options||Supply of Eurocard (100 x 160mm) PCB only excluding case|
|Case alternatives||die cast, aluminium or stainless steel sealed to IP65|
There are currently no options available to view from this page. To view the various options which may be available for the JBA, please view the JBA product datasheet by clicking here.
Copyright © 2018 LCM Systems
LCM Systems (România) • Strada Stefan Cel Mare 26a • Tunari • cod. 077180 • Ilfov • România
Cod unic de înregistrare (GB 785 3956 71) și Nr. Reg. Comerțului (2057541).