STA-5 Stainless Steel S-Type Tension and Compression Load Cell

The STA·5 series load cell is ideal for measurlng both tensile and compressive forces. The standard metric threads at each end of the load cell are designed to accept standard spherical seating rod-end bearing.

The STA·5 is suitable for many applications where a tension and compression load cell is required, for high accuracy measurements. Applications such as vessel weighing, material test machines and dynamometers area few examples.

The STA·5 series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system.

  • Can be supplied complete with mating spherical rod-end bearings
  • Environmentally sealed to IP68
  • Ranges 500, 1000, 2000, 5000kg
  • Stainless steel fully welded construction
Rated Load (kg) 500, 1000, 2000, 5000
Proof Load 150% of Rated Load
Ultimate Breaking Load > 300% of Rated Load
Output 2.0 mV/V at Rated Load (±0.2%)
Accuracy < ±0.02% of Rated Load
Non-Repeatability < ±0.01% of Rated Load
Excitation Voltage 10vdc recommended, 15vdc maximum
Bridge Resistance 350Ω
Insulation Resistance > 1000MΩ @ 100vdc
Operating Temperature Range -30 to +90°C
Compensated Temperature Range -10 to +40°C
Zero Temperature Coefficient < ±0.002% of Rated Load/°C
Span Temperature Coefficient < ±0.002% of Rated Load/°C
Environmental Protection Level IP68
Connection Type PUR screened cable 5m long, via cable gland
Wiring Connections
Blur +ve supply Black -ve supply
Green +ve sense Gray -ve sense
White +ve signa Red -ve signal
Options Available Can be supplied with instrumentation
Spherical seating rod end bearings
Compression load button

sta 5 drawing

  • Vessel weighing
  • Hanging scales
  • Engine/motor dynamometers
  • Material/tensile test machines
  • Process Weighing
  • Multi point structural weighing

Cere oferta pentru STA-5 Stainless Steel S-Type Tension and Compression Load Cell